gazon synthetique turquie

Based in Osmaniye, southern Turkey, HATKO’s manufacturing plant covers a 25,000 m2 surface and is equipped with cutting-edge technology.

HATKO Grass offers innovative and high-quality products according to industry assessments. HATKO‘s annual production capacity is 6 million m2, which allows fast delivery for all orders.

artificial grass installation Turkey

Today, the artificial grass demand is so high. As Hatko Sport, our product range are quite large. We produce Omega XL, Omega Turf, Invicto, Maxima, Spine Turf, Performa, Duograss, (Duo Grass) Multi Sport, Non-Fill and similar grass varieties. If you want to get information about our different grass products, you can check our products in the products section of our website.

The use of artificial turf is constantly increasing due to the limited use of natural grass and the rapid wear. Along with natural turf, artificial turf is very long life, installation and maintenance after carefully done artificial turf for many years can easily use and customers can please. You will definitely not regret the investment in artificial turf and you will realize how accurate your investment with positive feedback from your customers is. Now let’s examine the artificial turf assembly step by step.

  1. Determination of the Area of ​​the Astroturf:

First of all, map engineers or topographers determine the boundaries of the artificial turf. Corner pegs are made to these limits and thus the area boundaries of the astroturf are determined. With this study, it is determined that the operations on the carpet area will be done.

  1. Excavation:

During the determination of the area where the carpet area will be made, some levels are determined and work machines correct the floor of the astroturf based on these elevations. These denim limits determine the amount of excavation. After the grading process, the drainage channels, which are a very important part of the carpet area, are excavated. Drainage channels prevent the formation of puddles on the floor of the carpet and ensure that your site offers a better quality and healthy game pleasure. In any sport to be performed, the players will be able to do their sports very comfortably and will not be affected by the drainage channels from possible water deposits.

  1. Environmental Wall (Beam) Manufacturing:

Following the determination of the boundaries and elevations of the site, a concrete wall is used to cover the site. This wall will determine the boundaries of the site and protect your site from possible impacts. The wall of the perimeter is called beam. This will interrupt the interaction of your wall area with out and protect your area from possible damage and possible damage to your site.

  1. Making Drainage Channels:

As stated in the drainage channels, when the weather is rainy, it will prevent the accumulation of water on the ground of your field and ensure that the flow of the game will continue properly. Drainage channels are a must for a carpet court. If you want to use your astroturf floor in winter or cold weather and use it, you must install the drainage channels while you are installing your astroturf floor. When excavating your site, the drainage channels open and then place special perforated drainage pipes in these channels. This system will help to easily drain water out of the rain.

  1. Installation of Filling Materials:

The filler material is firstly filled with coarse crushed stone filling which is in the range of 30-45 aggregates known as 3-4 number 15 cm height. The second filling process is made of fine crushed stone filling which is in the range of 7-15mm aggregate known as 1-2 number on this coarse crushed stone layer. These fillings should be completed to be 5-6 cm below the upper level of the site floor. The most important point to be considered when filling material is that these fillers should be dust-free, washed and sifted. This prevents possible dusting.

  1. Gauge Process:

The gauging process ensures a complete increase in game quality. Any recess protrusions and fluctuations on the field surface will be prevented by the gauging process. Therefore, gauging such as drainage channels, is also vital for a astroturf. When the top layer filling of the astroturf is made, the surface of the field is gauged so that there is no fluctuation with a 3m long gauge.

  1. Compression:

Compression is done with a cylinder weighing up to 1 ton. Care should be taken to ensure that the smooth surface of the field surface is not disturbed during this process. If any fluctuation occurs during the compression process, the required materials are reinforced and the floor is corrected again by gauging.

  1. Wire Fence Trim:

Wire fences are laid and the carpet is cut from the area around the area. Unauthorized entry into the field is prevented.

  1. Installation of Lighting Systems:

There are two types of lighting system. The first one is Metal Halide Armatures and the other is lighting with Led Armatures that provide energy saving. In terms of cost, Metal Halide Armatures are still preferred because they are more economical.

  1. Artificial Grass Laying:

After the ground becomes smooth, artificial grass installation process is started. If the customer chooses, firstly the felt is laid on the carpet surface and the synthetic roll lawns are produced according to your wishes. After the artificial grass have been laid, the excess parts are cut and additionally made together. Large rolls are glued together so that there is no gap between them and a smooth ground is formed. After all these operations, the game lines of the astroturf are determined and drawn. Then, the surface of the field is filled with granule filler, ie sand, and the field surface is distributed to the field surface so that there is no space.

Finally, the carpet floor is brushed, ready for play and presented to our valued customers. As Hatko Spor, we have great references at home and abroad. Together with our professional team, we look forward to providing you the best service.

  • Quality Certificate
  • Duocolor
  • High Quality Polymers
  • High UV resistance
  • Environmentally Friendly
  • Professional Use
  • Amateur / Community Use
  • Skin Friendly
  • High Resilience
  • High Durability

Omega XL
with shockpad

  • Pile height 40/60 mm
  • Dtex 18.000/6
  • Micron 470
  • Width 1.7 mm
  • Ply  6 filament
  • Ribs 12

Norms

normes

Infill materials

Omega XL
with out shockpad

  • Pile height 40/60 mm
  • Dtex 18.000/6
  • Micron 470
  • Width 1.7 mm
  • Ply  6 filament
  • Ribs 12

Norms

normes

Infill materials